A new script is needed I guess (or is it possible to add these audio archives to VGMstream directly)?
There're some samples of such format @JoshW but they come from PS3 or PC: 1, 2 & 3.
Maybe this VG also used this format but streams were extracted / cut to make that set.
So long!
edited 8:22 AM EST January 12, 2019
Thanks bnnm.
Goodbye!
bnnm reripped Geometry wars so wander if more music was found and added or did he break up the .baf file but with .baf support I assume he just found more music.
edited 5:47 AM EST January 14, 2019
See you!
edited 1:37 AM EST January 15, 2019
I'll post about updates here too, but it may take a bit more time.
- Add TXTH sub-extension (.sub.ext.txth) to simplify extra config
- Fix some .ads looping [Gofun-go no Sekai (PS2)]
- Fix some .bnk codec/rates [Fieldrunners (PSP), Wipeout HD (PS3)]
- Fix .fag sample rate
- Add .gin and EA-XAS v0 decoder [Need for Speed Most Wanted]
- Add .vas VAGp [Kingdom Hearts II (PS2)]
- Add OKI16 TXTH/GENH decoder [Sweet Legacy (PS2), Hooligan (PS2)]
- Add proper .baf [Project Gotham Racing 4 (X360), Geometry Wars (PC)]
- Fix some looping .sps [FIFA 18 (PC)]
- Fix broken .pk subsongs [Scott Pilgrim (PS3)]
- Prepare Ubi SB for other types and add more games
- SD9 meta cleanup and modify loop flag for newer BMIIDX games (by bxaimc)
- Added 4-bit PCM decoder (3rd and 4th gen games) TXTH (by Nicknine)
- Added SBR/SBS format from older 7th gen games (NFS: ProStreet, NFS: Undercover) (by Nicknine)
- Added SBR/SBS format from newest EA Sports games (Harmony Sample Bank) (by Nicknine)
- Fix KOEI .mic loops [Dynasty Tactics 2 (PS2)]
- Add Ubi .sb/smX layers and sequences, more games
- Fix UE4 MSADPCM .adpcm [Heroes of Ark (iOS), Angels in the Sky (iOS)]
- Add TXTH/GENH interleave_last option
- Show layers/segments in description
- Fix type 04 .xnb [Scare Me (XBLIG)]
- Add .lasf (.asf) for consistency
***
kode54 and KDDLB set up some nice release system here: https://github.com/losnoco/vgmstream/releases
Thanks for adding msadpcm support for those two ios ue4 games I gave you ages ago. Well done on the success. Good to have them playable. Thanks very much. Maybe there are more rips i had like them. Will check
Cheers !
edited 5:34 AM EST January 22, 2019
edited 6:30 PM EST January 22, 2019
However my bin/tree/etc is built with GCC, and I think it's good to have an alt around (read this clusterfuck and marvel). So maybe you could leave the link as "alt GCC builds in case there is a problem with github releases" or something.
@marcusss - it took a while to figure out, remember the extension must be ".adpcm"
***
Subsongs and TXTPs are sweet (if I do say so myself) but sometimes making them is a pain. If you:
a) have gigantic sound banks and only want music and not sfx
b) want a bunch of separate files so rip's song quantity is easier to see
c) need .txtp for your gimped player without subsong support
then you can use this thing: txtp_maker.py (v2)
Works like a command line app, you can filter subsongs and stuff (barely tested and code is meh though). Example:
txtp_maker.py amb_fx.sb1 -c c:\test\test.exe -fd -fcm 2 -fsm 60.0 -l 2
This will create .txtp for subsongs with more +2 channels and +60 secs, while ignoring dupes, and if a >2ch song is found it'll create a .txtp per 2ch 'layer'.
edited 2:41 PM EST January 23, 2019
As always, thanks for all your work on this!
".SB4 files from Rainbow Six Vegas 1 & 2"
What platform are they from - X360, PS3, anything else? There was a theory that number in this kind of extensions - *.SB#, *.SM#, *.SP# - might mean platform (0 for PC, 4 for Xbox 360 and so on). It might explain this:
"the files names don't match with the ones I found".
And what did you mean when you said "to sort everything out"? Are you going to make a playlist when you finished checking thousands of tracks or you're intending to re-encode all found music to more common formats (MP3, OGG, whatever)?
You see there's no way to split given audio archives from Ubi games if one doesn't want to use DecUbiSnd (supposedly this tool doesn't even find every single track contained in those *.SM#/*.SS# archives) and transcoding them is the only option. Of course it's possible to keep entire sound bank along with a playlist but it's still not very convenient.
I think you should thank Nicknine for adding more & more UbiSoft format variants, it was Bnnm who started it all but it's Nicknine who continued it.
So long!
0 - PC
1 - PS2
2 - Xbox
3 - GC
4 - X360 (also early PSP)
5 - PSP (also 3DS)
6 - PS3
7 - Wii
edited 12:16 PM EST January 24, 2019
Later!
>Thanks Nicknine and Bnnm then ;)
- Add extensionless RIFF [Myst III (Xbox)]
- Fix Ubi IMA v2 [Donald Duck: Goin' Quackers (GC)]
- Fix most Ubi SB stuff and yet more games
- Add .sbv RIFF [Spongebob Squarepants - The Movie (PC)]
- Fix some SDF [Mr. Bean's Wacky World (Wii)]
- Add .wxv RIFF [Godzilla - Destroy All Monsters Melee (Xbox)]
***
There has been a lot of improvements recently in the Ubi SB (.sb0-7, .sm0-7) format. Nicknine added the "map" variation and I fixed layers and sequences (full songs for Prince of Persia and similar games with segmented audio). Since sbX/smX typically mix sfx and music you can use my TXTP maker I linked a few posts back to get music more easily.
The format is still retarded in that support needs to be added per game+platform, but we got most of them covered now.
Hello, I uploaded the "Sounds" directory of Rainbow Six Vegas 2 on Xbox 360 Here
Thanks for the work, it's really appreciated.
They were extracted with Python3 scripts by Nicknine & are even convertible with ealayer3 but it'd be way more convenient if they're playable right away: in that case TXTPs can be made + it's tidier to have a single 11-channel file instead of 6 MP3s.
Best wishes!
I've uploaded a sample here: http://s000.tinyupload.com/index.php?file_id=97033707168673495216
Can it be that these files aren't simple audio streams but some proprietary movies & require demuxing to make them sound better?
Best wishes!
- Fix some Ubi SB [Rainbow Six Vegas 2 (X360)]
- Add atomic BAO [Assassin's Creed (PS3/PC)]
- Fix EALayer3 11ch, V1b PCM, V2S loops [Army of Two 3 (PS3), NFS:W (PS3)]
- Fix .sfl loops in some cases
- Fix BAO layer/sequences and add .cpk and more games
- Add Ocean .DSF, .208 and DSA decoder [Last Rites (PC)]
- Add .vgm TXTH extension [Maximo (PS2)]
- Adjust Yamaha ADPCM description
- Adjust subsong title description and show for TXTP subsongs
- Fix Winamp slow seeking after max length with infinite loop on
- Fix foobar infinite loop when seeking after max length in some cases
- Add TXTP global "commands = #(...)" and allow per-segment masking/mixing
- Add Dragalia subkeys up to Skyborne Spectacle raid event (by Slashiee)
***
@Ultrafighter - demuxing won't help as the data looks correct, not sure why it glitches.
Maybe it's a custom XBOX IMA variation, post .exe from PC games using MUL and I'll try to figure out later.
Goodbye!
Edit: These banks from 007 Blood Stone X360 don't play, can they be added/fixed?
Later & thanks in advance!
edited 3:22 AM EST February 12, 2019
However, in foobar2000, the song's length is still reported as the length of the original ogg, rather than the length of two loops. The loops play, but the current time goes past the reported length, e.g. 2:03 / 1:33.
edited 10:39 PM EST February 13, 2019
- Fix some .baf [James Bond 007: Blood Stone (X360)]
- Add TXTP "loop_mode=keep" for intro+main songs that also loop normally
- Fix some more BAOs
- Fix memory corruption when forcing loops and clean internals
- Show loop info even when disabling loops in plugin's config
- Fix mpeg state not properly resetting in some cases
- Add TXTP "#h(rate)" to force sample rate
- Fix some .bnk [Manhunt 2 (PSP)]
- Add txtp_maker.py companion CLI tool
- Add .ds2 [Star Wars Bounty Hunter (GC)]
***
Note that stuff like Scott Pilgrim vs the World should now play all songs.
@shockdude - That's a foobar2000 quirk, you must manually refresh tags when length changes: shift + right click > tagging > reload info from files
@Ultrafighter - I think it's an IMA variation but it's hard to understand what is doing, will try again later.
The VG in question is Headhunter - Redemption for Xbox.
Also there're samples from 007 - Blood Stone for X360, quite a few tracks sound pretty bad ATM, with overwhelming static & hiss, can you look into those (check out TXTPs I included) and see if playback can be improved?
@Shockdude - "shift + right click > tagging > reload info from files" (by Bnnm)
It was there not so long ago but devs either moved this option somewhere else or removed it entirely from the latest versions of FB2K. Just wanted to point it out.
Bye!
edited 2:35 AM EST February 20, 2019
Also fyi vgmstream is also working with Touhou 14.5's sfls, in addition to Touhou 15.5's.
edited 11:21 PM EST February 20, 2019
...but some songs have an intro + Looping body...The problem is the intro contains a bit of the body as well (5s duplicated which needs to be skipped) so yeah vgmstream needs to skip the last part of the intro and then join with the body like a normal txtp.
I'm assuming txth cannot be combined with txtp or can it?? Would txth work so that vgmstream will play intro and skip # of samples end as per TXTH and then by playing the body as per what txtp does (intro + body) e.g.
Im sure im making it sound complicated but just wanted to know how to do this. Pity it is not a simple intro + body
e.g EX1
edited 9:09 AM EST February 25, 2019
edited 5:50 PM EST February 25, 2019
- Fix multitrack .baf [James Bond 007 - Blood Stone (X360)]
- Fix EA-XMA segfault
- Add some BAOs and v6 IMA [Ghost Recon Future Soldier (PC/PS3)]
- Fix rare .vag [Jak 3 (PS2)]
- Add Blitz IMA .str+wav [Zapper (PC)]
- Add TXTH interleave defaults for PSX/DSP/PCM16/PCM8 to simplify usage
- Update TXTH doc with info about how to use codecs
- Change AIX to use custom io and layered+segmented layout
- Remove unused AIX layout
- Fix some AIX [Danball Senki (PSP), Tetris Collection (PS2)]
- Fix extensionless files inside folders with dots in winamp/CLI
- Add FFDL Ogg [Final Fantasy Dimensions (Android)]
- Improve average bitrate with layers+segments
- Add Vicious Cycle .mus [Dinotopia (Xbox/GC)]
- Improve TXTP parsing, ignore spaces and add mask ranges
- Fix BAO sample rate in some cases [Assassin's Creed]
***
@Ultrafighter - .xsb is tremendously complex, I'll try to improve parsing later.
@Knurek - .bnk are for sfx. .vas is almost headerless (sample_rate varies in voice vs music), try TXTH:
id_value = 0x32414773 #"2AGs"
id_offset = @0x00:BE
#0x04: data size
#0x08: fixed value?
codec = PSX
channels = 1
sample_rate = 24000
start_offset = 0x2C
num_samples = data_size
.AFS may be CRI's, try .bms around.
@marcusss - I'm not sure if I get it but you can substract values from num_samples in the TXTH using value_sub (see doc)
I included the exe and 10MB or so of the assets file if someone can take a look at it?? The actual full size of assets.wad is almost 4 GB
SNK
Cheers!
edited 8:36 AM EST February 27, 2019
edited 8:37 AM EST February 27, 2019
- Fix .ogg multichannel order and cleanup
- Add multichannel layout for some OGG/MP4/WEM/FFmpeg and use in foobar
- Fix RIFF even-sized chunks, PCM GUID and add channel layout
- Fix tri-Ace Aska ADPCM .aac [Star Ocean anamnesis (Mobile)]
- Rename internal coding AICA to YAMAHA
- Add TXTP loop install: "#I(loop start) (loop end)"
- Add Czech_BAOs
- Show mm:ss in samples info and adjustments
- Accept replaygain_* in !tags.m3u for foobar
- Fix 3/5ch .SPS [Battlefield 4 (X360)]
- Clean .dcs+wav [Evil Twin (DC)]
- Add $AUTOALBUM !tags.m3u command
BTW are Splinter cell Conviction and/or Blacklist rips coming up? Just curious.
Cheers!
edited 4:22 AM EST March 6, 2019
They have the magic bytes PK so are zipped but upon extracting there are .MOGGs and CUES and none play in vgmstream.. I heard of MOGG before but this one doesn't work..different obviously.
Anyway the game uses hmxaudio plugin.
Samples
Cheers
edited 12:15 AM EDT March 12, 2019
- Fix some MIB+MIH missing samples [Galaxy Angel II (PS2)]
- Add ADX key [Bakumatsu Renka: Shinsengumi (PS2)]
- Add .ilv extension [Star Wars Episode III (PS2)]
- Fix some 7ch .SPS [BAttlefield 4 (X360)
- Fix newest .wem channel mask and validate wrong values
- Add AAC codec for TXTH and bytes-to-samples
- Calculate num_samples automatically for FFmpeg AAC (.aac/laac)
- Parse hex in TXTP loop install
- Add AAC .strm [Cursed Castilla (3DS)]
- Fix EA SCHl BR and handle multilang better [Battlefield: Hardline (PS3)]
- Add SFH .at3 wrapper [Devil May Cry 4 Demo (PS3), Jojo BA HD (PS3)]
- Add inline TXTH math: (key) = (number) (op) (number) ... [op: +-*/]
- Add non-demuxed EA SCHl .vp6 videos with multilang subsongs
- Add TXTH subfile_offset for wrapper files
- Add TXTH mpeg bytes-to-samples and tweaks
- Add TXTH inline coef_table = NNMM.... for DSP
- Add Konami MSF/XWMA [Metal Gear Solid 3 HD (PS3/X360)]
***
TXTH MATH: works like this data_size = @0x10 * 0x800 * channels
Priority is left-to-right. Do add brackets though, they are accounted for and if they are implemented in the future your .txth *will* break with impunity.
```
# normal priority
data_size = @0x10 * 0x800 + 0x800
# also works
data_size = (@0x10 + 1) * 0x800
# same as above but don't do this
# (may become @0x10 + (1 * 0x800) in the future
data_size = @0x10 + 1 * 0x800
# doesn't work at the moment, so reorder as (1 * 0x800) + @0x10
data_size = @0x10 + (1 * 0x800)
# fails, wrong bracket count
data_size = (@0x10 + 1 * 0x800
# fails, wrong bracket count
data_size = )@0x10 + 1 * 0x800
```
***
TXTH SUBFILES: for wrappers:
# parse ogg subfile but apply external loops
subfile_offset = 0x20
subfile_size = @0x08
subfile_extension = ogg
num_samples = @0x10
loop_start_sample = @0x14
loop_end_sample = @0x18
***
@Ultrafighter - Conviction was uploaded, Blacklist uses hashed filenames and a new BAO version so not likely.
@puterboy - .ivl can't play directly, must use .txth, same with The Last Express.
@marcusss - those are encrypted.
I was told from Ultrafighter that you might help me with extracting the music files from the Condemned 2 global.snd file. I inspected the file as a raw file on Audacity to confirm if the music was in the file but it does seem like it does but its not properly interleaved. I don't know what program or script I can use to look deeper into the file. If its possible you or someone else could look at the file that would be great
Thanks
-Dexter-
edited 10:14 PM EDT March 12, 2019
The download provided here just gives me a folder with files named things like "bgm_cr_012.at3.pos".
What to do with that?
Does the latter mean that you won't have to add each new multilang "tag" manually? It's pretty cool if I got it right. You see 1 title uses SHSP while another one uses SHES but they're really one & the same, then there're SHDE & SHGE, SHJA & SHJP, the list goes on & on; this update should save you lots of time I guess.
>Conviction was uploaded
Big thnx for this one, I'll grab it ASAP!
BTW are you also looking into Surf's up or Rainbow six 3 (both for PC)? These are games I'd like to check out but I think I can wait for your rip too. It's just that the timing seems perfect for making full proper rips of both VGs.
Best regards, Ultrafighter!
@-Dexter-: If Condemned 2 is quite similar to FEAR 2 you should have standalone SNDs for each level / map, be sure to try & find them all.
Then you shouldn't expect any descriptive track names too, it's gonna be like this: m01_sr_03a__0000.snd, dlc_03_04descent__0245.snd, etc. I believe. FEAR sequel had a few GAMEDB assets which definitely held some "true" proper titles for some BGMs but it wasn't possible to divide given SNDs into separate sounds while using names from GAMEDBs.
@RetroFanatic: *.at3.pos contain only looping info for bigger *.at3 files, only the latter contain actual audio data so you're not supposed to play *.at3.pos files.
edited 8:26 AM EDT March 13, 2019
For more on the .snd files, click here: http://wiki.xentax.com/index.php/The_Last_Express_SND
@Bnnm: I can throw some other PS2 *.bwav in the mix if samples from Harry Potter can be added to plugin. Mine come from Battlestar Galactica.
So long!
Sample
Thx
edited 8:27 AM EDT March 14, 2019
Did you use Gibbed.Dunia2 tool or something else (like a brand new script to sort all extensionless files, divide them into SM2/SS2/SP2, etc.)? I'm really eager to find out!
Another thing but also related to Ubi VGs: I've just noticed presence of quite a few unplayable SB5 files in Tom Clancy's Rainbow Six Vegas for PSP but (strangely enough) all TXTPs in root folder reference only unplayable (!) SB5s. Could it mean they were playable one day but the latest updates somehow affected their playback? I'd be grateful if you looked into this set once again.
I guess there's no sense in posting samples here since it'd require upping entire KS_STREAM.SS5, a 300 MB giant, so here's a link.
Finally there's a pair of unplayable BIKs in Prince of Persia - The Two Thrones [GC], RADTools (or binkconv.exe to be exact) reports that "no sound was found in Bink file". Could you look into these please?
Best regards!
- Add 9TAV [Metal Gear Solid 2/3 HD (Vita)]
- Fix some .mtaf looping when shouldn't
- Fix TXTH auto data_size with subsongs to calc up to next start_offset
- Add TXTH padding_size = (value|auto|auto-empty) to skip PS-ADPCM padding
- Add some Ubi SB [G.R.A.W (X360), Splinter Cell D.A. Online (PC)]
- Add Ubi .bnm [Rayman 2 (PC), Tonic Trouble (PC), Donald Duck Goin' Quackers (PC)]
***
@Ultrafighter - EA multilang tags still must be added, but it's easier now.
I've uploaded all .sbX I have, except Splinter Cell and Batman Vengeance PC that use an unplayable codec.
FAT+DAT, basically no. You need to know the .SSx names, and I simply manually named most in Far Cry Instincts.
.BIK you should trust RADTools, they are too small to have audio.
Rainbow Six Vegas I'll take a look.
.bwav I'll think about.
BTW I've seen numerous buggy streams in Tom Clancy's Rainbow Six Vegas [PS3] too, those ended with static (sometimes more than a minute). Strangely enough I had the same issue while ripping that game for that specific platform with DecUbiSndGui, it happened eons ago though.
I made *.TXTP for some of those faulty tracks; those can be found in my [sorted] archive I submitted to JoshW. You can either get that edited set from an FTP server or ask me to up the file somewhere else.
Also Tom Clancy's Splinter Cell - HD [PS3] had quite an issue: some BGM segments ended with 1 or 2 pieces of SFX, I mentioned those in a text doc (!sorted by Ultrafighter - Notes.txt) included in my [sorted] variant of initial rip.
Bye!
Take this file as example:
https://www.mediafire.com/file/kz9k5i5m5z2b907/BGM1_0007.sngw/file
How to should I fill the fields to make it work?
BGM1_0007.sngw
codec =
channels =
sample_rate =
loop_end_sample =
num_samples =
Thanks
See ya
You need (name).txtp and inside:
(filename.sngw)#I(loop start) (loop end)
Also see: https://github.com/losnoco/vgmstream/blob/master/doc/TXTP.md
- Added Team Ninja/Koei Tecmo Opus Variant for Dead or Alive Xtreme 3: Scarlet (Switch) (by bxaimc)
- Added support for EA SBR format containing SPS files. (by Nicknine)
- Fixed EA BNK parser (again) (by Nicknine)
- Fixed EA ABK parser (by Nicknine)
- Fix Ubi SB sample/layer bugs [SC HD (PS3), RS:Vegas (PSP), GRAW (X360)]
- Add .fsb.xen and key [Guitar Hero 5 (X360)]
- Add .fsb key [Sekiro (PC)]
- Add accurate sample count for VBR .mp3/lmp3
- Add TXTH chunk_* config for chunked data and fix leaks [SF EX 3 (PS3)]
- Add CLI -k (seek) config for debugging
- Fix TXTP boolean reading near EOL/EOF
- Add .ikm PC/PSP and fix PS2 samples/loops [Chaos Legion (PC), TLOH IV (PSP)]
- Improve .xsb internal name reading and .xsb filename detection
- Add txtp_maker -O option to rename repeated files
- Fix looping EA-XAS and leaks
- Fix .sngw 5.1 channel order
- Fix inconsistent PSX channel padding [Gitaroo Man (PS2)]
- Allow TXTH chunks + subfiles + subsongs [Gitaroo Man (PSP)]
- Tweak RIFF .at3 for extensionless/multi-riff [Gitaroo Man (PSP)]
- Enable TXTP mixing
***
TXTP MIXING: mainly to make multichannel/multilayered/crossfading files into stereo. Docs here but you want this:
# plays 2ch layer1 (base melody)
okami-ryoshima_coast.aix#@track 1,2
# plays 2ch layer1+2 (base melody+percussion)
okami-ryoshima_coast.aix#@layer-b 2 1~4 # 1~4 is optional
# uses 2ch layer1 (base melody) in the first loop, adds 2ch layer2 (percussion) to layer1 in the second
okami-ryoshima_coast.aix#@crosslayer-e 2
# uses 2ch track1 (exploration) in the first loop, changes to 2ch track2 (combat) in the second
ffxiii2-eclipse.scd#@crosstrack 2
# downmix bgm + vocals to stereo
nier_automata-BGM_0_012_04.wem
nier_automata-BGM_0_012_07.wem
mode = layers
commands = #@overlap 2
This feature is really cool (if I do say so myself) and flexible but it's complex and needs some knowledge to mix properly (>>), for most uses stick to the above.
***
@Puterboy1 - needs to split non-audio data first
- Add PCM .akb [Mobius Final Fantasy (Mobile)]
- Fix 5.1/7.1 .at3 LFE channel order [Devil May Cry 4 (PS3)]
- Fix TXTP "c" command and add "C" (@track alt)
- Improve txtp_maker -n option
- Fix layered current/loop sample (needed by TXTP)
- Add VAGp variant 'STEREOVAG2K' for The Simpsons Skateboarding (PS2) (by bxaimc)
When I tried listening to the set in question it turned out to be quite a disaster: most files played after I renamed them to *.OGG but a few dozens didn't, then bigger part of the remainder could be played fine as raw PCM; finally half a dozen remaining tracks happened to be headerless (?) ADPCM & I made a simple barebone TXTH for those. I don't want anyone to ever repeat these steps, that's why I'm asking you if *.aif/*.aif-Loop files can be added to VGMstream & played back as-they-are.
Also there's an unplayable FSB there, the troublesome file itself can be found here. For some reason the plugin doesn't recognize stream specs & play that FSB but fsb_aud_extr.exe (an old command-line tool which dumps contained streams to PCM) seems to process it just fine.
Bye!
I'm trying to do it with some XA files, the file plays but ignores the loop points, no matter what I do.
Here are the original file and the TXTP made:
https://www.mediafire.com/file/j41tb3ubtuuwj9d/0A056401.zip/file
This is what I wrote in TXTP:
0A056401.xa#I11390407
What I'm doing wrong? Thanks in advance
See ya
- (dev) Add CMake (by CyberBotX)
- Up the max sample rate to 128K [AI War: Fleet Command (PC)] (by CyberBotX)
- Add Dragalia music subkeys up to April Fools (by slashiee)
- Add ReplayGain and extended read functionality to Winamp plugin (by CyberBotX)
- Added HCA key for Puchiguru Love Live! (by CursedBlackCat)
- Fix TXTP mono mixing in some cases
- Fix txtp_maker for filenames with spaces
- Add TXTP mixed groups for layers+segments in the same file
- Up the max sample rate to 192K [Dex (PS4)]
- Add .laif/aif-Loop extension [Psychonauts (PC)]
- Fix memory leak/lock when failing to open dual file stereo
- Fix .hca key detection for newer Tales of the Rays files
- Fix some .msf/mp3 looping
***
@Ultrafighter - I added .aif Ogg (may need to be renamed to .laif in some players) but others are raw extracts/headerless and need .txth (ADPCM is XBOX IMA). The actual header/format seems to be .isb, maybe some day.
@Koto - loops for me, are your plugins updated? Remember to play the .txtp directly, not the .xa
There's another related plugin needed to be updated?
I have now another issue. For that precise stream, I want to make it play with no loop, but add just 10 seconds more for fade. The problem is, that the fade always appears before the "loop zero" ends, and neither vgmstream config (Fade Delay) or txtp editing (#d option) works for me.
Is there anyway to add 10 seconds fade delay with installed loops when vgmstream supposes to play 0 loops? Thanks
edited 10:07 AM EDT April 10, 2019
first you post a link containing the sample you want someone to program over at vgmstream. which wouldn't be so bad if you didn't immediately proceed to make TWO "check muh samples" posts in a row (and they were a couple of days apart).
sure you were waiting for that one file(yeah, it's two pairs of files, whatever) to get supported to vgmstream but just because nothing has been done regarding your sample yet doesn't mean you have to make every single post that contains you saying something along the lines of "what about my samples?" every week or so, that makes you look completely entitled, as if you want to play that one fine on vgmstream right now.
edited 5:53 PM EDT April 10, 2019
0A056401.xa #I11390407 #l1 #d10.0
You need to set l1 to play once, if that fails also try to add #f10.0
If you use foobar you need to refresh tags too (shift + right click > Tagging > Reload info from files), or rename the .txtp
TAPSONIC BOLD
playdemo.adx
playdemo.usm
edited 5:51 AM EDT April 17, 2019
- Add txtp_segmenter companion CLI tool
- Add .sxd3 [Fate/Estella (PS4), Gran Turismo Sport (PS4)]
- Fix some .sm2/ss2 [Batman: Rise of Sin Tzu (Xbox)]
- Fix some .spw [Final Fantasy XI (PC)]
- Fix TXTP fade time in CLI
- Fix segmented .wave kbps
- Fix .hca key detection for newer Tales of the Rays files
- Fix some .msf/mp3 looping
codec = PSX
sample_rate = 10000
num_samples = data_size
start_offset = 0
channels = 1
loop_flag = 0
Audio file -> https://www.sendspace.com/file/nwtxfv
edited 11:43 AM EDT April 21, 2019
codec = PSX
channels = 1
sample_rate = 10000
num_samples = data_size
start_offset = 0
loop_flag = 0
Last two are optional btw, and loop flag may be "auto" to use PS-ADPCM flags.
I intentionally used loop_flag to disable loops, and start_offset was just to see if it helped.
Order mattering was mainly to handle sensitive (but not improbable) cases like this:
codec = PSX
sample_rate = 48000
interleave = 0x1000
start_offset = 0x20
# will make next reads convert "bytes-to-samples"
sample_type = bytes
channels = 1 # temp for next value
num_samples = @0x10 #size for 1ch!
channels = @0x0c # correct value
loop_start_sample = @0x14 #size for 2ch!
You can now rewrite some things with math but without order mattering I'm not sure how to handle stuff like that.
Changes can be suggested here.
I just ripped the thing to see if the audio was currently playable, but apparently it isn't.
The engine files extracted as-is contain padding and would have size prepended before "RIFF". If your .bms tries to extract the "RIFF" inside, its size must be correct and padding removed.
- Restore TXTP loop_start_segment=1 for single files
- Add HCA keys
- Fix some .vs [Front Mission 4 (PS2)]
- Fix .at3/at9 mono files with wrong channel layout
https://zenhax.com/viewtopic.php?p=35877#p35877
Try to look for bms of the format rather than just BG&E, since other Ubisoft games used it.
sally_bf.bms
UPDATE: Both bms scripts didn't work, the one linked by bnnm (not hcs because I'm an idiot who can't read anymore) extracted the files in a much tidier fashion, but the files still didn't look correct when viewed from a hex editor, and the one from the github kept spamming a message along the lines of it doesn't know what to do with this file, so it didn't bother extracting much of anything. I'm guessing the bf file got screwed up during package decryption somehow which seems odd since the other files looked okay.
edited 11:47 PM EDT May 22, 2019
edited 6:15 AM EDT May 23, 2019
Test hca download link https://www.lanzous.com/i4a3upc